El modificador de impacto es un aditivo que puede mejorar la resistencia al impacto de los productos plásticos y es ampliamente utilizado en la producción de diversos productos plásticos. Hay muchos tipos de modificadores de impacto, que se pueden dividir i
Los gránulos de plástico reciclados de China son un tipo de material plástico que se produce a partir del reciclaje de residuos plásticos postconsumo o postindustriales. Algunas de las características clave de estos gránulos de plástico reciclado inc
1. Influencia del IM: (1) En general, la fluidez de los plásticos afecta algunas propiedades de los materiales, como la resistencia a la tracción, el alargamiento, el módulo elástico y otros parámetros. Cuando el índice de fusión del plástico es
Con los crecientes requisitos de los automóviles para el peso ligero, el ahorro de energía y la protección del medio ambiente, el peso ligero del automóvil se ha convertido en la dirección principal de investigación y desarrollo de la industria del automóvil.
La Exposición de la Industria del Plástico de China (Xiamen) 2022 se llevará a cabo del 7 al 10 de julio en el Centro Internacional de Convenciones y Exposiciones de Xiamen (el mismo período que la Feria Industrial Internacional de Xiamen). Esto hará
2023-Aug-22
PET is a common recyclable plastic in our daily life, code-named "1", with good mechanical properties, wear resistance, high transparency, non-toxic and tasteless and other properties, beverage bottles made of PET have high strength, good transparency, non-toxic, anti-penetration, lightweight, high production efficiency, etc., so it has been widely used.
Although the body of the beverage bottle is made of PET, its cap is often not PET, but generally made of PE. Why?
01 Raw material price
The first is the price of raw materials. After all, cost control is the key to generating economic benefits. The price per ton of PET virgin material for blow molding is more expensive than HDPE. If it is mass-produced, HDPE bottle caps will be more cost-effective than pet bottle caps.
02 Processing mold
Hot runner molds are generally used to make PET preforms. The hot runner mold processing technology is a relatively advanced plastic processing technology. The cost of its components is high, and PE does not need to be so complicated. Therefore, under the same number of cavities, PET mold production cost is much more expensive than PE.
03 Color Characteristics
The PET material itself is transparent, and the general bottle caps are colored. It is difficult to make the transparent material opaque, so the PE material itself is directly selected.
04 Hardness properties
The most important point is the hardness of the material. We all know that the hardness of PET is higher than that of PE. Generally speaking, the softer the surface, the higher the sealing degree of the lid container. For the packaging bottle containing liquid, The requirements for tightness are higher, so PE material will be more suitable.
In summary, we can see that PE material is much softer than PET, and the price is relatively cheap. It is widely used in the market, and the mold is not complicated. It can be separated from PET well during recycling and sorting and has little impact on the recycling of PET bottles. , so most of the bottle caps on the market are PE, and a small amount is PP bottle caps. Our company provides pet plastic modifier.
Por favor, siga leyendo, manténgase informado, suscríbase y le invitamos a decirnos lo que piensa.
Código de escaneo: